By entering pairing mode, you make the device you want to connect to your laptop or desktop computer discoverable. Turn on the headset, when you pair the headset with a device for the first time after you bought it, or after you initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.

mW (1kHz) (when connecting via the headphone cable with the unit turned on) , 98dB / mW (1kHz) (when connecting via the headphone cable with the unit turned off) Sony says that the noise cancellation on the H910N has been improved and is now based on the 1000XM3 signature. To that end, there’s now a separate microphone unit and a far-field mic in the headphones. The noise cancellation system uses the dual mics to produce a negative replica of the ambient sounds to create a noise-free environment. There are three modes to choose from the companion app-- traveling, walking, and waiting. Based on these profiles and the surrounding environment, the headphones tune the music listening experience along with its noise cancellation system. A bonus of the Sony WH-H900N design is that it comes with futuristic touch controls, so you don’t have to spend time searching for buttons with your fingers when you’re on the move. The plastic and metal construction of these headphones also remains surprisingly lightweight after hours of use. Sony WH-H900N review: FeaturesSony is one of the market leaders in the audio landscape for a reason, with countless amazing products to offer. Your Bluetooth headphones and speakers may immediately go into pairing mode when used for the first time or after initializing (reset). However, the second time you pair it, you may have to press and hold the Power button for 5-7 seconds. The instructions may vary depending on your Bluetooth device model and computer's operating system (OS). Follow the instructions accordingly. Nothing Phone (2) v2.0.2 update improves camera quality Read: Sony NW-WS623 Walkman Earphones Review Over-Ear Endurance go wired with the headphone cable Look for all Bluetooth listings by opening the [Network Adapters category] and/or the [Bluetooth Radios category] (if available).

Make sure that [WH-1000XM4] has been selected as both the output and input device. Then close the Settings.The H910N has a plastic construction and even though it is fairly lightweight, it feels sturdy in the hand and while wearing it. The headband has also been tuned for a comfortable fit with a new silicone cushion that reduces wrinkles in the long run. As for the earpad and its housing, that too has been tweaked with a trapezoid design with a larger surface area to cover the ears. If you are using your Bluetooth speakers or headphones for the first time, they will most likely go into pairing mode automatically when you turn them on. Try switching Bluetooth OFF and ON again if you are certain your device is in pairing mode but is not showing in your device list on your computer. If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1.

However, the second time you pair it, you will have to press and hold the pairing mode button for 7 seconds. Depending on the BLUETOOTH device, the headset may be connected with the device automatically as soon as they are paired.

Before you start

There’s a slight amount of compression around the ears and on the top of the head – enough to keep your headphones feeling secure – but we don’t imagine this would cause too much of an issue for any dedicated audio fan. One slight issue with chunky over-ear headphones of course, is that they can get a little warm after a while – however that doesn’t seem to be too much of a problem here. On very hot days, you may need to adjust your Sony wireless headphones from time to time, but that’s it. The steps to enterpairing mode may vary depending on the device you want to connect (headphones, speakers, smartphone, etc.).