If its spider web stype cracks that are holding either the polish paste or old wax - they will need cleaning out and filling properly. Then came a good polishing with rubbing compound such as flarecla with a proper vitrifier or purpose made polisher, and then another machine polish with just T cut. Surely it doesn't matter what the material underneath is if you are talking about a painted surface.

This gelcoat polish leaves a smooth, high gloss wax finish even on dark-colored gelcoats, and it protects the gelcoat surface against weathering. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag.I was a little unsure wether in time the autoglym polish would cause any problems by way of a reaction with the fibre glass or the paint finish on the fibre glass sides. However, a product that has stood out to me in my conversations with our guests is Autoglym Super Resin.

However, with caravans such as Bailey’s based on the Alu-Tech construction technique, that’s not the case. However, the current label for the light grade of 3M cutting compound wax polish does reference for use on caravans.

Then there is the deck, the hull, the propeller, and the gel coat that may be damaged if cleaned with the wrong products—so what is the best way to polish a boat? If you are doing it right it should polish the fibreglass and create a healthy splatter about the place. This is important because the hull cleaner won’t work if there is grease, as it’ll act as a barrier between the hull and the cleaner. The polish used to bring back the shine on caravan fibreglass panels has to be a little bit more abrasive. First job when cleaning a mould was to strip off all the old wax and dust that had coupled with it from the atmosphere, with acetone or cellulose thinners.

New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .Located in the Staffordshire Moorlands, Horton Common Caravan Site benefits from expansive views over the Peak District National Park. Ideal for wax-ready large surface area jobs where radiant shine, protective longevity and timely job completion are all paramount. New Zealand The cost of one of these Sea Cat fibreglass reinforced plastic boats with a 25 hp outboard engine is 3,000 euros. Beware Composite panels are completely different and must be treated differently or severe damage can occur !

With the dimpled finish, excessive polish/wax can get caught up in the dimples etc, its just generally a very difficult surface to polish.Use a second clean, dry microfiber cloth or terry cloth to remove the hazy film, using a circular motion.