GALAXYER Snow Foam Gun Sprayer, 900ml Adjustable Car Cleaning Foam Lance, Garden Watering Tool Fit Universal Garden Hose, Foam Sprayer for Car Washing Home Garden Watering

Product Information

Occasionally you may need to return an item which you have received, if you are not satisfied with your item you can return the item to uswithin 14 daysof receipt. These can both be applied using a regular spray bottle and will help break up the road grime on the car so it can be rinsed away more easily before washing the car with a regular wash mitt. This ensures that you get the correct “panel impact ratio” (PIR) which essentially means the concentration of product that actually hits the panel. So you have rinsed the car and finished cleaning, job done! However it is important to rinse through and clean the snow foaming lance to ensure it is reedy to use again next time,after each use you should empty the snow foam bottle and rinse out, fill it up with clean water and run again using your pressure washer to clean the filter. Snow Foaminghelpful tips

Keeping your car exterior clean is a great way to take care of the aesthetic of your car as well as its longevity. Follow our step by step guide.Most snow foam bottles will give a recommended dilution ratio based on how much you add to a foam cannon attached to a pressure washer. This accounts for the added dilution of the product when the water from the pressure washer is involved. Using snow foam is our favourite way of pre-washing your car. Not only does it look like your car has been hit by a blizzard, but it also helps to lift away embedded bits of dirt that regular shampoo sometimes struggles to lift (think bird poo, tree sap and overspray). You don’t even need a particularly powerful pressure washer, a budget pressure washer will still be good enough. Have a look at Detailing World for loads more info. Quite a few respected online places sell them - Elite, CleanYourCar both spring to mind. Have a look round.

product/helpAdviseTab.hbs -->

\n\t\t\tDemon Shine Demon Foam With Snow Foam Gun 2 Litre

Compared to a standard car wash shampoo, snow foam is designed to be used as a pre-wash solution. This means that it loosens and removes dirt before washing your car with a wash mitt. The purpose of this is that it helps to reduce the chances of introducing swirl marks onto the paint as there will be very little dirt left on the car. Snow foam is a mixture that you spray on using a pressure washer, the snow foam mixture itself is a pre-foam, it sits on your car paintwork and helps to dissolve and lift dirt and grime that is there. If you leave it to do its thing, it makes it easier to wash off the dirt by hand or with the pressure washer, removing all dirt and stains. The mixture you use for your snow foamer will depend on what you buy, however to use it you will need a snow foam gun which will connect to your pressure washer. Just as clay bars emerged from the professional world into mainstream car care, snow foam is now part of just about every maker’s range, and a lance to lay it on is equally important.

a>

Conclusion

I am sure you have seen it, cars covered in a white snow shampoo looking mixture that beautifully coats the vehicle in a mist of snow. This is snow foaming, and this is a popular way to lift the dirt on your car when cleaning. Snow Foam Car Wash Guide Instead of a pressure washer, use the pressure of your garden hose to cover your vehicle in soap suds or snow foam. Easy & simple. Delivered complete with a standard connector for a garden hose, or attach with a suitably sized hose clip. data-src="https://cdn.media.amplience.net/i/washford/haluk-car-cleaning-spot1-step3-process-winter21-1382x867" You want to use sweeping, unhurried motions moving either up and down or side to side. This will ensure your car gets full and even coverage. If you have an adjustable lance, using the wide spray means you need fewer passes to cover the car. Be careful using the jet spray setting because this can actually remove foam you already had set in place. Leave it

As well as our testing and experience using multiple snow foams, we also based our recommendations on the latest research and several factors. Some of the factors that we took into consideration included the foam’s effectiveness, formulation, cling ability, scent and value for money. Conclusion When using a hand-held foamer, you need to use a lower concentration of product than it may state on the bottle. Depending on your water pressure, the experience of washing your car will be close to that of using a pressure washer. Even on low water pressure, you can get a rich foam cover: Simply use a lower dilution ratio and set the adjustable dial to position E. You will never want to go without again. Works brilliantly on motorcycles as well. If the snow foam says on the bottle to put 100ml of product and 900ml of water in a foam cannon, then instead put 10ml of product and 990ml of water in your spray bottle. This will account for the extra dilution that a pressure washer would provide.So it is actually possible to just mix up your snow foam diluted in water in a regular trigger spray bottle, and spray it directly onto the panels and rinse it off as normal. Another great alternative which works very well for heavily-soiled vehicles is Bilt Hamber Surfex HD, at a 5% concentration. This is highly alkaline so may degrade any waxes or sealants slightly faster, but it is very effective at cleaning.